Bộ điện cực, 10 cái, A102, Dây hàn bằng thép không gỉ 1,8mm, Thích hợp để hàn, Chống bắn tung tóe thấp, Chống gỉ, E308-16

Features: Good performance: low splash tendency. Material: Made of high quality stainless steel, rust and resistant. Wide range of applications: used for welding -resistant 0Cr19Ni9 and 0Cr19Ni11Ti, 201, 202, 301, 302, 304 stainless steel structures. The -resistant working temperature is below 300 °C. Usage: Suitable for AC and DC Suggestion: -1.0mm and 1.2mm electrodes have strict requirements on the current of the welding machine and need to be adjusted slowly. Thin plate welding is not recommended for beginners and those new to welding, especially below 1mm. The 1.0mm and 1.2mm electrodes are too thin when welding. It will rock back and forth. For customers with rich welding experience, if they want to weld thin plates about 0.5mm, they can choose .4mm electrode. Please check the current range of the electrode current before , so as not to cause unnecessary trouble to both parties. - The electrode should be baked at 300-350℃ for  hour before welding. - Try to use DC power supply, the current should not be too large. Specification: Part Name: Electrode Material: stainless steel Colour: As show Size：As follows Standard: GB/T983 E308-16  A5.4 E308-16 Diameter 1.8mm Length 250mm Current 20-55A Package Contents: 10PCS* electrode Note: . The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.