Đồng Hồ Vạn Năng Kỹ Thuật Số Đa Năng, HT93, Cầm Tay, CẢNH BÁO NCV, Đồng Hồ Vạn Năng Thông Minh, [Thanh Toán Khi Nhận Hàng]

Feature: NCV DETECTION： In NCV mode, move the instrument's NCV sensing probe gradually closer to the area being tested. When the instrument detects a weak electric field signal, the green backlight lights up, and the screen displays "---L"When the instrument detects a strong electric field signal, the red backlight lights up, and it emits a quick beeping sound, while the screen displays "--H" AUTO RANGE： When the instrument is set to AUTO mode, it automatically identifies measurement signals for voltage, resistance, and continuity. LOW BATTERY INDICATION： When the battery voltage is below the normal operating level, the top right corner of the screen will display symbol to remind the user to replace the battery. LED FLASHLIGHT ILLUMINATION： The LED flashlight allows for close inspection of contact points, making it convenient for probe measurements. AUTO SHUTDOWN： The instrument automatically powers off within 15 minutes of no operation to conserve battery power. HIGH-RESOLUTION LCD DISPLAY： The display provides clear and accurate measurement data and function symbols. Specification: Part Name: Smart Multimeter Material: ABS Color: as show DC Voltage：2.000V/20.00V/200.0V/600V，±(0.5%+3) AC Voltage：2.000V/20.00V/200.0V/600V，±(1.0%+3) Resistance：2000Ω/20.00kΩ/200.0kΩ/2.000ΜΩ/20.00ΜΩ，±(1.0%+3) Counts：2000 Display：HTN Auto/Manual Range：Auto Live Test：√ NCV：√ Phase Test：√ Continuity：√ Data Hold：√ True RMS：√ Bandwidth：40~1KHz Low Battery Indication：√ Auto Power Off：√ Back Light：√ Work Light：√ Power Supply2x1.5V AAA Batteries (not included) Weight：Approx.66.9g Size：136.2X44.5X32mm (Line length 60mm) Safety Rating：EN61010-2-030 EN61010-2-033 CAT III 600V Package content: 1*HT93 Smart Multimeter 1*Detection Pen 1*English Manual Note: 1. The real color of the item may be slightly different from the The pictures shown on the website are caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.